Using conventional microphones with long multi-core cables results in a dramatic loss of signal strength, and sound quality due to cable resistance and capacitance. Rode's D-Power Plug is as close as you can come to having a 'Turbo Charger' for Dynamic microphones! Featuring a precision instrumentation grade pre-amplifier circuit, D-Power Plug will turn any standard dynamic microphone into a high-gain, electronically balanced output device. Powered by standard 48-volt phantom power, D-Power Plug can drive cables in excess of 100 m with negligible loss of signal quality or power.
Rode D-Power Plug Features:
- Instrumentation grade pre-amplifier.
- Balanced input and balanced output.
- Minimum losses over long cable runs.
- P48V phantom powered.
- Gain: +20 dB.
- Input Level (nominal): 1 mV.
- Output Level (nominal): 10 mV.
- Frequency Response: 20 Hz~20 kHz (-3 dB)
- Input impedance: 100 k ohm balanced/arm.
- Output Impedence: 100 ohm balanced.
- Noise: -116 dB A-Wt RTI.
- Max. Input: 0.8 Vp-p.
- Max. Output: +11.4 dBu @ 1% THD (8 Vp-p).
- Input Connector: XLR 3 PIN Female.
- Output Connector: XLR 3 PIN Male.
- Pin Assignment: Pin 1 GND,
- Pin 2 Signal (+),
- Pin 3 Signal (-).
- Current Consumption: 3 mA @ 48V.
- Weight approx.: 73.8 grm
Read more...
